guest #ifconfig -a
dummy0    Link encap:Ethernet  HWaddr 00:00:00:00:00:00  
          BROADCAST NOARP  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

eth0      Link encap:Ethernet  HWaddr FE:FD:00:00:00:00  
          inet addr:192.168.0.144  Bcast:192.168.0.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:21 errors:0 dropped:0 overruns:0 frame:0
          TX packets:168 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100 
          RX bytes:1428 (1.3 Kb)  TX bytes:21804 (21.2 Kb)
          Interrupt:5 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:6 errors:0 dropped:0 overruns:0 frame:0
          TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:488 (488.0 b)  TX bytes:488 (488.0 b)


guest #netstat -nr
Kernel IP routing table
Destination     Gateway         Genmask         Flags   MSS Window  irtt Iface
192.168.0.254   0.0.0.0         255.255.255.255 UH       40 0          0 eth0
192.168.0.0     0.0.0.0         255.255.255.0   U        40 0          0 eth0
127.0.0.0       0.0.0.0         255.0.0.0       U        40 0          0 lo
0.0.0.0         192.168.0.254   0.0.0.0         UG       40 0          0 eth0



(EDITORS NOTE:  There are two default fingerprints in the GuestOS.  The first
is the 'dummy0' interface.  This can be removed at compile time using the
'disable CONFIG_DUMMY' option.  Second, every UML GustOS has the exact same
MAC address, FE:FD:00:00:00:00.  It is recommended you change that to something
else).